Bracelet/Watch Link Remover Tool and Pliers

Link Removal Tool Instructions

1) The most important thing to know is from which side to push the link out.
look at the pin from both side and you will find out that one side of the pin is inside more then the other.
you want to push the pin out from the side that is more inside the bracelet.
not the side that is flat with the bracelet.

2) Ones you got some of the pin pushed out,
you can take it completely out by hand a plier or similar tool.
try not to bend the pin if you intend to reuse it.

3) Putting the pin back is easy: start by placing the pin in place by hand and then use plier or similar tool.
Make sure the pin is flat with the bracelet and is not sticking out.
you can use a mini hammer in the end if needed.

Important
Put scotch tape on the plier tip, to avoid scratching the bracelet.
Longer plier (like in the photo above) is recommended.